Section 431 (Information, Gauges & Warning Devices)
WARNING: This page is about a different car, the 2004 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Instrument Cluster and Panel Illumination
- Instrument Cluster
- Notes
- Principles of Operation
- Notes
- Integrated Circuit Display
- Warning Center Display
- Trip A/B And Odometer Displays
- PRNDL Display
- Gauges
- Warning Indicator Lamps
- Air Bag Warning Indication
- ABS Warning Indication
- Brake Warning Indication
- Charging System Warning Indicator
- Door Ajar Warning Indication (Base Cluster Only)
- Engine Over-Temperature Warning Indicator
- Low Fuel Warning Indicator (Base Cluster Only)
- Low Washer Fluid Warning Indication (Base Cluster Only)
- Safety Belt Warning Indicator
- Indicator Lamps
- Horn
- Information And Message Center
- Warning Devices
- Parking Aid
- Diagnosis And Testing
- Instrument Cluster and Panel Illumination
- Notes
- Special Tool(s)
- Inspection and Verification
- Symptom Chart
- Circuit Reference
- PINPOINT TEST A: One or More Module-Controlled Illumination Source(s) is Inoperative
- PINPOINT TEST B: The Control Illumination Is Inoperative
- PINPOINT TEST C: The Control Illumination Is Always On
- PINPOINT TEST D: The Instrument Cluster Illumination Is Inoperative
- PINPOINT TEST E: The Instrument Panel Illumination Does Not Dim
- Instrument Cluster
- Notes
- Special Tool(s)
- Parameter Reset and Key Programming
- Inspection and Verification
- Notes
- Instrument Cluster Diagnostic Trouble Code (DTC) Index
- Front Electronic Module (FEM) Diagnostic Trouble Code (DTC) Index
- Rear Electronic Module (REM) Diagnostic Trouble Code (DTC) Index
- Restraint Control Module (RCM) Diagnostic Trouble Code (DTC) Index
- Powertrain Control Module (PCM) Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Symptom Chart
- Connector Circuit Reference
- Engine Oil Pressure Switch C103
- Low Washer Fluid Switch C138
- Front Electronic Module (FEM) C201b
- Front Electronic Module (FEM) C201c
- Instrument Cluster C220a
- Instrument Cluster C220b
- Restraint Control Module (RCM) C310a
- Rear Electronic Module C420c
- Rear Electronic Module (REM) C420d
- Fuel Delivery Module C433
- Jet Pump Module C434
- Brake Fluid Level Switch C1395
- PINPOINT TEST F: No Communication With The Instrument Cluster Module
- PINPOINT TEST G: Incorrect Fuel Gauge Indication
- PINPOINT TEST H: Incorrect Temperature Gauge Indication
- PINPOINT TEST I: The Low Fuel Warning Indicator Is Never/Always On
- PINPOINT TEST J: The Speedometer Is Inoperative
- PINPOINT TEST K: The Odometer Is Inoperative
- PINPOINT TEST L: The Tachometer Is Inoperative
- PINPOINT TEST M: The Door Ajar Indicator Is Inoperative (Chime Is Operative)/Does Not Operate Correctly
- PINPOINT TEST N: The Safety Belt Warning Indicator Is Never/Always On
- PINPOINT TEST O: The Low Oil Pressure Warning Indicator Is Never/Always On
- PINPOINT TEST P: The Charging System Warning Indicator Is Never/Always On
- PINPOINT TEST Q: The Brake Warning Indicator Is Never On
- PINPOINT TEST R: The High Beam Indicator Is Never/Always On
- PINPOINT TEST S: The Low Washer Fluid Indicator Is Never/Always On
- PINPOINT TEST T: The Anti-Lock Brake System (ABS) Warning Indicator Is Never On
- PINPOINT TEST U: The Traction Control And Advance Traction Control Indicators Are Never/Always On
- PINPOINT TEST V: The Electronic Throttle Control Indicator Is Never/Always On
- PINPOINT TEST W: The Malfunction Indicator Lamp (MIL) Is Never/Always On
- PINPOINT TEST X: The Turn/Hazard Indicator Is Never/Always On
- PINPOINT TEST Y: The Steering Wheel Column Lock Warning Indicator Is Never/Always On
- PINPOINT TEST Z: The Speed Control Indicator Is Never/Always On
- PINPOINT TEST AA: The Engine Over-Temperature Warning Indicator Is Never/Always On
- PINPOINT TEST AB: The Air Bag Warning Indicator Is Never On
- PINPOINT TEST AC: The Check Fuel Cap Indicator Is Never/Always On
- PINPOINT TEST AD: The Integrated Circuit Display Is Inoperative
- PINPOINT TEST AE: The Instrument Cluster Is Inoperative
- Horn
- Information And Message Center
- Notes
- Special Tool(s)
- Inspection and Verification
- Symptom Chart
- Symptom Chart
- Connector Circuit Reference
- PINPOINT TEST AH: The Message Center Is Not Operating Correctly
- PINPOINT TEST AI: The Lampout Warning Indicator Is Inoperative
- PINPOINT TEST AJ: The Message Center Switch Does Not Operate Correctly
- PINPOINT TEST AK: The Indicator does Not Operate Correctly - Low Fuel Level Display
- PINPOINT TEST AL: The Indicator Is Inoperative - Oil Life Status, A/C Filter Life
- PINPOINT TEST AM: The Indicator Does Not Operate Correctly - Low Washer Fluid Level Display
- PINPOINT TEST AN: The Indicator Does Not Operate Correctly - Low Brake Fluid Level Display
- PINPOINT TEST AO: The Indicator Does Not Operate Correctly - Door Ajar Display
- PINPOINT TEST AP: The Indicator Does Not Operate Correctly - Traction Control
- PINPOINT TEST AQ: The Indicator Does Not Operate Correctly - Check Fuel Cap
- PINPOINT TEST AR: The Indicator Does Not Operate Correctly - Electronic Throttle Control
- PINPOINT TEST AS: The Indicator Does Not Operate Correctly - Parking Brake
- Warning Devices
- Notes
- Special Tool(s)
- Inspection and Verification
- Symptom Chart
- Notes
- Connector Circuit Reference
- PINPOINT TEST AT: The Key-In-Ignition Chime Does Not Operate Correctly
- PINPOINT TEST AU: The Headlamp On Reminder Chime Does Not Operate Correctly
- PINPOINT TEST AV: The Safety Belt Warning Chime Does Not Operate Correctly
- PINPOINT TEST AW: The Air Bag Warning Chime Does Not Operate Correctly
- PINPOINT TEST AX: The Fail Safe Cooling Chime Does Not Operate Correctly
- PINPOINT TEST AY: The Turn Signal Warning Chime Does Not Operate Correctly
- PINPOINT TEST AZ: The Electronic Parking Brake Warning Chime Does Not Operate Correctly
- PINPOINT TEST BA: The Chime Sounds When The Driver Door Is Ajar (No Key In Ignition And Headlamps Off)
- Parking Aid
- Notes
- Special Tool(s)
- Inspection and Verification
- Symptom Chart
- Instrument Cluster and Panel Illumination
- General Procedures
- Removal And Installation