Section 129 (2.0L - Fuel Supply - Engine Code(S): CJAA & CVCA (Hatchback))
WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- 20 Fuel Supply
- General Information
- Misfueling
- Notes
- Step 1: Engine Was Started With Incorrect Fuel
- Step 2: Engine Was Not Started With Incorrect Fuel
- Step 3: Shavings In The Fuel Delivery Unit And Reservoir
- Step 4: No Shavings In The Fuel Delivery Unit And Reservoir
- Step 5: Shavings In The High Pressure Pump
- Step 6: No Shavings In The High Pressure Pump
- Misfueling Guard, Deactivating
- Fuel Tank, Draining
- Misfueling
- Description And Operation
- Overview - Fuel Tank
- Overview - Fuel Delivery Unit/Fuel Level Sensor
- Overview - Fuel Filter
- Overview - Accelerator Pedal Mechanism
- Transfer Fuel Pump -G6-, Checking
- Fuel Pump -G6- Voltage Supply, Checking
- Transfer Fuel Pump -G6- Fuel Pressure, Checking, Engine Code CJAA
- Transfer Fuel Pump -G6- Fuel Delivery Rate, Checking, Engine Code CJAA
- Auxiliary Fuel Pump -V393- Inline Electric Fuel Pump, Checking, Engine Code CJAA
- Fuel Pressure, Checking Engine Codes CVCA
- Fuel Delivery Rate, Checking Engine Codes CVCA
- Fuel Pump -G6- Current Draw, Checking
- Auxiliary Fuel Pump -V393- Or Fuel Pump 2 -V277- Inline Electric Fuel Pump, Checking, Engine Code CJAA
- Specifications
- Removal And Installation
- Fuel Tank, Removing And Installing
- Misfueling Guard, Removing And Installing
- Fuel Delivery Unit/Fuel Level Sensor, Removing And Installing
- Fuel Level Sensor -G-, Removing And Installing
- Connector Couplings, Separating
- Fuel Filter, Removing And Installing
- Fuel Hoses Inside Engine Compartment
- Accelerator Pedal Module -Gx2-, Removing And Installing
- Fuel Pump, Removing And Installing
- Special Tools
- General Information