Accelerator Pedal Module -Gx2-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the steering column cover -arrows-.

Fig 1: Identifying Steering Column Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry off the cap -3- using a screwdriver.

-- Remove bolts -2-.

-- Disconnect the connector -1- from the accelerator pedal module.

Fig 2: Accelerator Pedal Module, Connector, Cap, Bolt, Retaining Pins & Centering Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Using the Accelerator Pedal Module Release Tool T10238 insert it all the way into the opening provided as shown.

Fig 3: Identifying Release Tool T10238

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the accelerator pedal module.