Fuel Level Sensor -G-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fuel Level Sensor Electrical Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal. Note the following:

-- Connect the connectors -1- through -3-.

-- Pay attention to the color coding.

-- Pull on the connector to make sure it is secure.

-- Insert the Fuel Level Sensor -G- in the guide on the fuel delivery unit and push down until it engages.

-- Install the fuel delivery unit. Refer to INSTALLING .