Accelerator Pedal Module -Gx2-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the connector -1- to the accelerator pedal module -4- and lock the connector -arrow-.

Fig 1: Accelerator Pedal Module, Connector, Cap, Bolt, Retaining Pins & Centering Pin

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the accelerator pedal module onto the bolt -5-.

-- Insert the centering pin -6- into the hole in the floor panel.

-- Tighten the bolt -2- on the accelerator pedal module and install the cap -3-.

-- Install the steering column cover.

Fig 2: Identifying Steering Column Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.