Rear Axle - 117 Chassis
- General Information
- Testing & Repair
- Locate noises from rear axle - AR35.00-P-2000A
- Remove/install complete rear axle - AR35.10-P-0010NKB
- Remove/install front and rear rubber bushings in rear axle mount - AR35.10-P-0040NKB
- Remove/install bearing for rear axle differential suspension in rear axle carrier - AR35.10-P-0056MTA
- Remove/install trailing arm - AR35.20-P-0100NKB
- Remove/install track rod - AR35.20-P-0109NKB
- Remove/install camber strut - AR35.20-P-0110NKB
- Remove/install spring control arm, replace rubber bushing - AR35.20-P-0114NKB
- Remove/install wheel carrier - AR35.20-P-0115NKB
- Replace all rubber bushings at wheel carrier - AR35.20-P-0123NKB
- Remove/install rear axle shaft flange and angular ball bearing - AR35.20-P-0130NKB
- Seal differential - AR35.30-P-0001MTA
- Remove/install inserted rear axle shaft - AR35.30-P-0621MTA
- Remove/install constant velocity joint or boot of splined rear axle shaft - AR35.30-P-0662MTA
- Remove/install differential - AR35.31-P-0520MTA
- Install new radial sealing ring at drive pinion gear (with differential installed) - AR35.31-P-0530MTA
- Replace radial sealing rings on side of rear axle center assembly - AR35.31-P-0545MTA
- Remove/install all-wheel drive solenoid valve - AR35.31-P-0600MTA
- Test & Adjustment Values
- Maintenance
- Capacities & Specifications
- Torque Specifications
- Special Tools
- 176 589 01 15 00 Drift - WS35.00-P-0020B
- 124 589 04 33 00 Puller - WS35.00-P-0021B
- 203 589 00 15 00 Drift - WS35.00-P-0022B
- 116 589 15 15 00 Drift - WS35.00-P-0038C
- 140 589 01 34 00 Collet chuck - WS35.00-P-0085C
- 176 589 00 15 00 Drift - WS35.00-P-0144B
- 202 589 04 43 00 Extraction tool - WS35.00-P-0153C
- 210 589 03 43 00 Extraction and insertion tool - WS35.00-P-0154C
- 176 589 00 43 00 Extraction and insertion tool - WS35.00-P-0185B
- 124 589 02 34 00 Thrust piece - WS35.00-P-0229B
- 001 589 01 63 00 Securing belt - WS35.00-P-0251B
- 001 589 51 33 00 Hollow piston cylinder - WS35.00-P-0252B
- 246 589 00 43 00 Extraction and insertion tool - WS35.00-P-0270C
- 246 589 01 43 00 Extraction and insertion tool - WS35.00-P-0273B
- 652 589 00 33 00 Pulling device - WS35.00-P-3388C