Section 10 (Air Intake, Turbo Charging - 164 Chassis -- Diesel)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
- General Information
- Maintenance
- Testing & Repair
- Remove/install air filter housing, left side - AR09.10-P-1150GZB
- Remove/install air filter housing, right side - AR09.10-P-1150GZC
- Remove/install engine intake air duct downstream of air filter - AR09.10-P-8130GZB
- Remove/install inlet port shutoff - AR09.20-P-1314GZB
- Remove/install intake port shutoff sensor - AR09.20-P-1315GZC
- Remove/install mixing chamber - AR09.20-P-1320GZB
- Remove/install turbocharger - AR09.40-P-6020GZB
- Remove/install oil supply connection fitting of turbocharger - AR09.40-P-6023GZB
- Remove/install noise damper downstream of charge air cooler - AR09.40-P-6925GZB
- Remove/install charge air manifold - AR09.41-P-1310GZB
- Remove/install the throttle valve positioner - AR09.41-P-1321GZB
- Remove/install charge air cooler - AR09.41-P-6817GZB
- Remove/install charge air hose upstream of charge air cooler - AR09.41-P-8621GZB
- Removing/installing the charge air hose upstream of the charge air cooler - AR09.41-P-8621RTB
- Remove/install engine charge air channel at turbocharger - AR09.41-P-8622GZB
- Remove/install engine charge air duct upstream of charge air cooler - AR09.41-P-8623GZB
- Remove/install engine charge air channel downstream of charge air cooler - AR09.41-P-8624GZB
- Remove/install charge air hose downstream of the charge air cooler - AR09.41-P-8625GZB
- Remove/install charge air hose downstream of the charge air cooler - AR09.41-P-8625RTB
- Special Tools