Open and close coupling - AR09.41-P-1311-01AL
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
Open clutch
- Slide nose (2) of catch spring (3) to position (B).
Never pull on the eyelet (1) as the catch spring (3) will lose pretension.
- Detach hose on component.
- Replace seal.
Close clutch
- Slide nose (2) of catch spring (3) to position (A).
- Slide hose onto component until the catch spring (3) latches.
- Check connection by pulling a little at the hose.