Bolt diagram of charge air distribution pipe - AR09.41-P-1310-01PI

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.

CHARGE AIR PIPE/CHARGE AIR COOLING

Number	Designation		Engine 642
BA09.41-P-1009-01J	Bolt of charge air distribution line to cylinder head	Nm	18

Firmly install charge air manifold according to bolt plan and tightening torque.
Tighten screw/bolt (1) and screw/bolt (11) again using tightening torque.

Fig 1: Identifying Charge Air Distribution Pipe Bolt Tightening Sequence
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.