Testing and repair work: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - AR01.00-Z-9606AB
ENGINE 606
| Inspect cylinders with a light probe | ENGINE 111, 271, 602.982 /983, 604, 605, 606 / | AR01.00-P-0200HA | |
| Testing compression pressure | ENGINE 604, 605, 606 / | AR01.00-P-1200HA | |
| Inspect cylinders for leaks | ENGINE 111, 271, 604, 605, 606 | AR01.00-P-1300HA | |
| Disconnecting, connecting engine wiring harness | ENGINE 604, 605, 606 in MODEL 210 up to 31.5.96 | AR01.00-P-2410D | |
| Disconnecting, connecting engine wiring harness | ENGINE 606.961 in MODEL 140 | AR01.00-P-2410G | |
| Disconnecting, connecting engine wiring harness | ENGINE 604, 605, 606 in MODEL 210 as of 1.6.96 | AR01.00-P-2410H | |
| Disconnecting, connecting engine wiring harness | ENGINE 605, 606 in MODEL 124 | AR01.00-P-2410HB | |
| Cranking engine with starter | ENGINE 602, 604, 605, 606... | AR01.10-P-0110B | |
| Cranking engine with starter | ENGINE 606.961 in MODEL 140 | AR01.10-P-0110D | |
| Cranking engine with starter | ENGINE 605, 606 in MODEL 124 | AR01.10-P-0110HA | |
| Remove/install engine | ENGINE 604, 605 in MODEL 202 ENGINE 604, 605, 606.912 in MODEL 210 | AR01.10-P-2400HA | |
| Remove/install engine | ENGINE 605, 606 in MODEL 124 ENGINE 606.961 in MODEL 140 | AR01.10-P-2400HB | |
| Remove/install engine | ENGINE 606.962 in MODEL 210 | AR01.10-P-2400HC | |
| Removing, installing cylinder head cover | ENGINE 604, 605, 606.912/961 /962 /964 | AR01.20-P-5014HA | |
| Removing, installing prechamber | ENGINE 604, 605, 606 / | AR01.30-P-5402HA | |
| Remove/install cylinder head | ENGINE 604, 605, 606... | AR01.30-P-5800HA | |
| Checking, facing cylinder head contact surface | ENGINE 604, 605, 606 / | AR01.30-P-7162B | |
| Remove/install timing case cover | ENGINE 604, 605, 606... | AR01.40-P-8000HA | |
| Knocking out, inserting steel ball of main oil gallery | ENGINE 602.982 /983, 604, 605, 606 | AR01.40-P-8498A | |
| Replace core plugs in crankcase | ENGINE 111 /, 602.982 /983, 604, 605, 606, 271.921 /940 /946 /948 /955 /956 (except 111.920 /921) | AR01.40-P-8499HA | |
| Remove/install the end cover | ENGINES 111, 602.982 /983 /, 604, 605, 606 | AR01.40-P-8913HA | |
| Machine crankcase contact surface | ENGINES 604, 605, 606 / | AR01.40-P-9133B | |
| Measure cylinder bores | ENGINES 604, 605, 606 / | AR01.40-P-9202A | |
| Widening cylinder bore in the crankcase | ENGINES 604, 605, 606 / | AR01.40-P-9271A | |
| Remove cylinder liner | ENGINES 604, 605, 606 / | AR01.40-P-9272A | |
| Installing cylinder liner | ENGINE 604, 605, 606 / | AR01.40-P-9273A | |
| Boring and honing cylinder bores | ENGINES 604, 605, 606 / | AR01.40-P-9291A | |
| Remove/install oil pan | ENGINE 606.961 in MODEL 140 ENGINES 605, 606.912 /962 in MODEL 210 | AR01.45-P-7500C | |
| Remove/install oil pan | ENGINE 605, 606 in MODEL 124 ENGINE 601, 604, 605 in MODEL 202 | AR01.45-P-7500HA |