Section 9 (Engine Cooling System - 3.2L DURATORQ-TDCI (148KW/200PS) - Puma)

• Specifications
  • Specifications
• Description And Operation
  • Engine Cooling - Component Location
  • Engine Cooling - System Operation and Component Description
    • System Operation
• Diagnosis And Testing
  • Engine Cooling
    • Notes
    • PCM DTC Chart
    • Inspection and Verification
    • Symptom Chart
    • Pinpoint Tests
      • PINPOINT TEST A : Loss of Coolant
        • Notes
        • Pinpoint Test A : Pinpoint Test
      • PINPOINT TEST B : The Engine Overheats
        • Notes
        • Pinpoint Test B : Pinpoint Test
      • PINPOINT TEST C : The Engine Does Not Reach Normal Operating Temperature
        • Notes
        • Pinpoint Test C : Pinpoint Test
    • Component Tests
      • Cooling System Pressure Test
      • Thermostat
      • Radiator Leak Test, Removed From Vehicle
• General Procedures
  • Cooling System Draining, Vacuum Filling and Bleeding
  • Heater Core Backflushing
  • Coolant Test
  • Cooling System Condition Evaluation
  • Cooling System Flushing - With Oil Contamination
  • Cooling System Flushing - Without Oil Contamination
• Removal And Installation
  • Block Heater
    • Removal
    • Installation
  • Coolant Manifold
    • Notes
    • Removal
    • Installation
  • Coolant Outlet Connector
    • Removal
    • Installation
  • Coolant Pump
    • Notes
    • Removal
    • Installation
  • Cooling Fan
    • Notes
    • Removal
    • Installation
  • Cooling Fan Motor and Shroud
    • Notes
    • Removal
    • Installation
  • Cooling Module
    • Removal
    • Installation
  • Degas Bottle
    • Notes
    • Removal
    • Installation
  • Radiator
    • Removal
    • Installation
  • Radiator Lower Hose
    • Notes
    • Removal
    • Installation
  • Thermostat
    • Removal
    • Installation
  • Thermostat Housing
    • Notes
    • Removal
    • Installation