Self Diagnosis (N74) - 760LI - DTC P11EC - P1414 (BMW DTC 12A202 - 170301)

• DTC P11EC: BMW DTC 12A202; DME -- O2 Sensor System Checking Signal Biased/Stuck Lean (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2272: BMW DTC 12A202; DME -- O2 Sensor Signal Biased/Stuck Lean (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013A: BMW DTC 12A308; DME -- O2 Sensor Slow Response - Rich To Lean (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013C: BMW DTC 12A408; DME -- O2 Sensor Slow Response - Rich To Lean (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0138: BMW DTC 12A701; DME -- O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0158: BMW DTC 12A801; DME -- O2 Sensor Circuit High Voltage (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0137: BMW DTC 12A902; DME -- O2 Sensor Circuit Low Voltage (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0157: BMW DTC 12AA02; DME -- O2 Sensor Circuit Low Voltage (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0136: BMW DTC 12AB04; DME -- O2 Sensor Circuit (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0140: BMW DTC 12AB04; DME -- O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0156: BMW DTC 12AC04; DME -- O2 Sensor Circuit (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0160: BMW DTC 12AC04; DME -- O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013E: BMW DTC 12AF08; DME -- O2 Sensor Delayed Response - Rich To Lean (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P014A: BMW DTC 12B008; DME -- O2 Sensor Delayed Response - Rich To Lean (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0032: BMW DTC 12B101; DME -- Ho2S Heater Control Circuit High (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0031: BMW DTC 12B102; DME -- Ho2S Heater Control Circuit Low (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0030: BMW DTC 12B104; DME -- Ho2S Heater Control Circuit (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0052: BMW DTC 12B201; DME -- Ho2S Heater Control Circuit High (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0051: BMW DTC 12B202; DME -- Ho2S Heater Control Circuit Low (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0050: BMW DTC 12B204; DME -- Ho2S Heater Control Circuit (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0038: BMW DTC 12B301; DME -- Ho2S Heater Control Circuit High (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0037: BMW DTC 12B302; DME -- Ho2S Heater Control Circuit Low (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0036: BMW DTC 12B304; DME -- Ho2S Heater Control Circuit (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0058: BMW DTC 12B401; DME -- Ho2S Heater Control Circuit High (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0057: BMW DTC 12B402; DME -- Ho2S Heater Control Circuit Low (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0056: BMW DTC 12B404; DME -- Ho2S Heater Control Circuit (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0135: BMW DTC 12B501; DME -- O2 Sensor Heater Circuit (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3026: BMW DTC 12B501; DME -- O2 Sensor Temperature Measurement Operating Temperature Not Reached (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165F: BMW DTC 12B504; DME -- Internal Control Module Measurement Error Oxygen Sensor Heating (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0155: BMW DTC 12B601; DME -- O2 Sensor Heater Circuit (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3027: BMW DTC 12B601; DME -- O2 Sensor Temperature Measurement Operating Temperature Not Reached (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P166F: BMW DTC 12B604; DME -- Internal Control Module Measurement Error Oxygen Sensor Heating (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0141: BMW DTC 12B701; DME -- O2 Sensor Heater Circuit (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0161: BMW DTC 12B801; DME -- O2 Sensor Heater Circuit (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3026: BMW DTC 12B901; DME -- O2 Sensor Temperature Measurement Operating Temperature Not Reached (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P165F: BMW DTC 12B904; DME -- Internal Control Module Measurement Error Oxygen Sensor Heating (Bank 1 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3027: BMW DTC 12BA01; DME -- O2 Sensor Temperature Measurement Operating Temperature Not Reached (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P166F: BMW DTC 12BA04; DME -- Internal Control Module Measurement Error Oxygen Sensor Heating (Bank 2 Sensor 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013B: BMW DTC 12BE08; DME -- O2 Sensor Slow Response - Lean To Rich (Bank 1 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P013D: BMW DTC 12BF08; DME -- O2 Sensor Slow Response - Lean To Rich (Bank 2 Sensor 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2089: BMW DTC 130001; DME -- 'A' Camshaft Position Actuator Control Circuit High (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2088: BMW DTC 130002; DME -- 'A' Camshaft Position Actuator Control Circuit Low (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0010: BMW DTC 130004; DME -- 'A' Camshaft Position Actuator Control Circuit/Open (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0012: BMW DTC 130108; DME -- 'A' Camshaft Position - Timing Over-Retarded (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2091: BMW DTC 130201; DME -- 'B' Camshaft Position Actuator Control Circuit High (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2090: BMW DTC 130202; DME -- 'B' Camshaft Position Actuator Control Circuit Low (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0013: BMW DTC 130204; DME -- 'B' Camshaft Position Actuator Control Circuit/Open (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0015: BMW DTC 130308; DME -- 'B' Camshaft Position - Timing Over-Retarded (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2093: BMW DTC 130401; DME -- 'A' Camshaft Position Actuator Control Circuit High (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2092: BMW DTC 130402; DME -- 'A' Camshaft Position Actuator Control Circuit Low (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0020: BMW DTC 130404; DME -- 'A' Camshaft Position Actuator Control Circuit/Open (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0022: BMW DTC 130508; DME -- 'A' Camshaft Position - Timing Over-Retarded (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2095: BMW DTC 130601; DME -- 'B' Camshaft Position Actuator Control Circuit High (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P2094: BMW DTC 130602; DME -- 'B' Camshaft Position Actuator Control Circuit Low (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0023: BMW DTC 130604; DME -- 'B' Camshaft Position Actuator Control Circuit/Open (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0025: BMW DTC 130708; DME -- 'B' Camshaft Position - Timing Over-Retarded (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BA: BMW DTC 130801; DME -- 'A' Camshaft Tooth Off (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BC: BMW DTC 130901; DME -- 'B' Camshaft Tooth Off (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BB: BMW DTC 130A01; DME -- 'A' Camshaft Tooth Off (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13BD: BMW DTC 130B01; DME -- 'B' Camshaft Tooth Off (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B4: BMW DTC 130C01; DME -- Crankshaft/'A' Camshaft Reference Error (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B6: BMW DTC 130D01; DME -- Crankshaft/'B' Camshaft Reference Error (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0016: BMW DTC 130E01; DME -- Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B5: BMW DTC 131001; DME -- Crankshaft/'A' Camshaft Reference Error (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B7: BMW DTC 131101; DME -- Crankshaft/'B' Camshaft Reference Error (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0018: BMW DTC 131201; DME -- Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0300: BMW DTC 140001; DME -- Random/Multiple Cylinder Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0300: BMW DTC 140002; DME -- Random/Multiple Cylinder Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0300: BMW DTC 140004; DME -- Random/Multiple Cylinder Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0300: BMW DTC 140008; DME -- Random/Multiple Cylinder Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0301: BMW DTC 140101; DME -- Cylinder 1 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0301: BMW DTC 140102; DME -- Cylinder 1 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0301: BMW DTC 140104; DME -- Cylinder 1 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0302: BMW DTC 140201; DME -- Cylinder 2 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0302: BMW DTC 140202; DME -- Cylinder 2 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0302: BMW DTC 140204; DME -- Cylinder 2 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0303: BMW DTC 140301; DME -- Cylinder 3 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0303: BMW DTC 140302; DME -- Cylinder 3 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0303: BMW DTC 140304; DME -- Cylinder 3 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0304: BMW DTC 140401; DME -- Cylinder 4 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0304: BMW DTC 140402; DME -- Cylinder 4 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0304: BMW DTC 140404; DME -- Cylinder 4 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0305: BMW DTC 140501; DME -- Cylinder 5 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0305: BMW DTC 140502; DME -- Cylinder 5 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0305: BMW DTC 140504; DME -- Cylinder 5 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0306: BMW DTC 140601; DME -- Cylinder 6 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0306: BMW DTC 140602; DME -- Cylinder 6 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0306: BMW DTC 140604; DME -- Cylinder 6 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0307: BMW DTC 140701; DME -- Cylinder 7 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0307: BMW DTC 140702; DME -- Cylinder 7 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0307: BMW DTC 140704; DME -- Cylinder 7 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0308: BMW DTC 140801; DME -- Cylinder 8 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0308: BMW DTC 140802; DME -- Cylinder 8 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0308: BMW DTC 140804; DME -- Cylinder 8 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0309: BMW DTC 140901; DME -- Cylinder 9 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0309: BMW DTC 140902; DME -- Cylinder 9 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0309: BMW DTC 140904; DME -- Cylinder 9 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0310: BMW DTC 140A01; DME -- Cylinder 10 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0310: BMW DTC 140A02; DME -- Cylinder 10 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0310: BMW DTC 140A04; DME -- Cylinder 10 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0311: BMW DTC 140B01; DME -- Cylinder 11 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0311: BMW DTC 140B02; DME -- Cylinder 11 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0311: BMW DTC 140B04; DME -- Cylinder 11 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0312: BMW DTC 140C01; DME -- Cylinder 12 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0312: BMW DTC 140C02; DME -- Cylinder 12 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0312: BMW DTC 140C04; DME -- Cylinder 12 Misfire Detected
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0335: BMW DTC 160001; DME -- Crankshaft Position Sensor 'A' Circuit
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0336: BMW DTC 160002; DME -- Crankshaft Position Sensor 'A' Circuit Range/Performance
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P138F: BMW DTC 160101; DME -- Crankshaft Position Sensor Signal Synchronization Error
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0370: BMW DTC 160201; DME -- Timing Reference High Resolution Signal 'A'
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0370: BMW DTC 160301; DME -- Timing Reference High Resolution Signal 'A'
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1396: BMW DTC 160402; DME -- Crankshaft Position Sensor Segment Timing Plausibility
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B0: BMW DTC 162001; DME -- Camshaft Position Sensor Signal 'A' Synchronization Error (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0340: BMW DTC 162101; DME -- Camshaft Position Sensor 'A' Circuit (Bank 1 Or Single Sensor)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1300: BMW DTC 162201; DME -- Camshaft Position Sensor 'A' Segment Timing Error (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B1: BMW DTC 162301; DME -- Camshaft Position Sensor Signal 'A' Synchronization Error (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0345: BMW DTC 162401; DME -- Camshaft Position Sensor 'A' Circuit (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P139A: BMW DTC 162501; DME -- Camshaft Position Sensor 'A' Segment Timing Error (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B2: BMW DTC 163101; DME -- Camshaft Position Sensor Signal 'B' Synchronization Error (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0365: BMW DTC 163201; DME -- Camshaft Position Sensor 'B' Circuit (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P130A: BMW DTC 163301; DME -- Camshaft Position Sensor 'B' Segment Timing Error (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13B3: BMW DTC 163401; DME -- Camshaft Position Sensor Signal 'B' Synchronization Error (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0390: BMW DTC 163501; DME -- Camshaft Position Sensor 'B' Circuit (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P139B: BMW DTC 163601; DME -- Camshaft Position Sensor 'B' Segment Timing Error (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0328: BMW DTC 168001; DME -- Knock/Combustion Vibration Sensor 1 Circuit High (Bank 1 Or Single Sensor)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0327: BMW DTC 168002; DME -- Knock/Combustion Vibration Sensor 1 Circuit Low (Bank 1 Or Single Sensor)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0326: BMW DTC 168008; DME -- Knock/Combustion Vibration Sensor 1 Circuit Range/Performance (Bank 1 Or Single Sensor)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1328: BMW DTC 168101; DME -- Knock/Combustion Vibration Sensor 2 Circuit High (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1327: BMW DTC 168102; DME -- Knock/Combustion Vibration Sensor 2 Circuit Low (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P135B: BMW DTC 168108; DME -- Knock/Combustion Vibration Sensor 2 Circuit Range/Performance (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P032D: BMW DTC 168201; DME -- Knock/Combustion Vibration Sensor 3 Circuit High (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1330: BMW DTC 168201; DME -- Knock/Combustion Vibration Sensor 3 Circuit High (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P032C: BMW DTC 168202; DME -- Knock/Combustion Vibration Sensor 3 Circuit Low (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1329: BMW DTC 168202; DME -- Knock/Combustion Vibration Sensor 3 Circuit Low (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P032B: BMW DTC 168208; DME -- Knock/Combustion Vibration Sensor 3 Circuit Range/Performance (Bank 1)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P135F: BMW DTC 168208; DME -- Knock/Combustion Vibration Sensor 3 Circuit Range/Performance (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P033D: BMW DTC 168301; DME -- Knock/Combustion Vibration Sensor 4 Circuit High (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P033C: BMW DTC 168302; DME -- Knock/Combustion Vibration Sensor 4 Circuit Low (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P033B: BMW DTC 168308; DME -- Knock/Combustion Vibration Sensor 4 Circuit Range/Performance (Bank 2)
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1335: BMW DTC 168401; DME -- Knock/Combustion Vibration Sensor 5 Circuit High
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1334: BMW DTC 168402; DME -- Knock/Combustion Vibration Sensor 5 Circuit Low
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13AC: BMW DTC 168408; DME -- Knock/Combustion Vibration Sensor 5 Circuit Range/Performance
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1337: BMW DTC 168501; DME -- Knock/Combustion Vibration Sensor 6 Circuit High
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1336: BMW DTC 168502; DME -- Knock/Combustion Vibration Sensor 6 Circuit Low
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P13AD: BMW DTC 168508; DME -- Knock/Combustion Vibration Sensor 6 Circuit Range/Performance
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P1414: BMW DTC 170301; DME -- Secondary Air Injection Pump Relay Control Circuit Signal High
  • Notes
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction