Section 73 (Wheels, Tires, Hubs - Removal, Replacement And Installation (644 Body))
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Replacement Of Components (2000-2004)
- Wheel, Tire, Hub (2000)
- Front Wheel Bearing/Hub/Wheel Spindle, Replacing
- Notes
- Remove
- Remove the Brake Caliper Assembly
- Remove the ABS Sensor
- Remove the Wheel Spindle
- Locate the Wheel Spindle In the Special Tool
- Remove the Bearing From the Wheel Spindle
- Remove the Bearing Cap And the Bearing Retainer From the Hub
- Clean And Check the Components
- Replace the Wheel Studs
- Press the Bearing Onto the Wheel Spindle
- Install the Bearing Retainer On the Hub Side Of the Wheel Spindle
- Install the Wheel Hub
- Install the Wheel Spindle
- Install the Wheel Spindle On the Front Bushing
- Install the Tie Rod Ball Joint On the Wheel Spindle
- Install the Brake Caliper
- Install the ABS Sensor
- Install the Wheel
- Front Wheel Bearing/Hub/Wheel Spindle, Replacing
- Wheel, Tire, Hub (2000-2004)
- Front Wheel Bearing/Hub/Wheel Spindle, Replacing
- Notes
- Remove
- Remove the Brake Caliper Assembly
- Remove the ABS Sensor
- Remove the Wheel Spindle
- Locate the Wheel Spindle In the Special Tool
- Remove the Bearing From the Wheel Spindle
- Remove the Bearing Cap And the Bearing Retainer From the Hub
- Clean And Check the Components
- Replace the Wheel Studs
- Press the Bearing Onto the Wheel Spindle
- Install the Wheel Hub
- Install the Wheel Spindle
- Install the Wheel Spindle On the Front Bushing
- Install the Tie Rod Ball Joint On the Wheel Spindle
- Install the Brake Caliper
- Install the ABS Sensor
- Install the Wheel
- Installing Wheels
- Front Wheel Bearing/Hub/Wheel Spindle, Replacing