LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Wheels, Tires, Hubs - Removal, Replacement And Installation (644 Body)) >> Wheel, Tire, Hub (2000) >> Front Wheel Bearing/Hub/Wheel Spindle, Replacing >> Install the Bearing Retainer On the Hub Side Of the Wheel Spindle

Install the Bearing Retainer On the Hub Side Of the Wheel Spindle

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate the sealing ring. Install the sealing ring using special tool 9995082 .

Ensure that the upper section is level with the wheel spindle.

Remove the tool.

scientia non olet · About LEMON Manuals