LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Wheels, Tires, Hubs - Removal, Replacement And Installation (644 Body)) >> Wheel, Tire, Hub (2000-2004) >> Front Wheel Bearing/Hub/Wheel Spindle, Replacing >> Install the Wheel Spindle On the Front Bushing

Install the Wheel Spindle On the Front Bushing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Control Arm
GLL116336Courtesy of VOLVO CARS OF NORTH AMERICA.

Install two new nuts on the wheel spindle screws.

Press the wheel spindle to the bottom. Tighten the wheel spindle screws. Tighten to 90 Nm  .

Tighten the ball joint nut. Tighten to 67 Nm  .

scientia non olet · About LEMON Manuals