WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Wheel Hub
Courtesy of VOLVO CARS OF NORTH AMERICA.
Clean the ABS sensor, the shaft journal and the hub.
Position the hub. Install the new
nut.
Tighten to:
-97 175 Nm
98- 120 Nm +30°
.
Clean and install the brake disc. Tighten to 5 Nm
.