Rear Wheel Suspension - Removal, Replacement And Installation (XC)
- Cross Member, Bushing (2001-2007)
- Sub-Frame Rear, Replacing
- Notes
- Removal
- Removing The Sub-Frame
- Removing Shock Absorbers, Lateral Links And Anti-Roll Bar Links
- Removing The Position Sensor (Four-C Only)
- Removing The Screws From The Track Rods And Control Arms
- Removing The Anti-Roll Bar
- Detaching The Final Drive Housing/Rear Axle Member
- Lowering The Final Drive Housing
- Removing Components From The Subframe
- Installation
- Notes
- Installing Components On The Subframe
- Installing The Sub-Frame
- Preparations For The Installation Of The Final Drive
- Installing The Final Drive On The Sub-Frame
- Installing The Anti-Roll Bar
- Installing The Link Arm And Track Rod
- Installing The Position Sensor (Four-C Only)
- Installing The Torque Arm And Anti-Roll Bar Link
- Finishing
- Tightening The Drive Shafts
- Sub-Frame Rear, Replacing
- Stay, Arm, Joint (2001-2007)
- Bushing Front Lateral Link, Replacing
- Bushing Front Sub-Frame, Replacing
- Bushing Inner Control Arm Lower, Replace
- Bushing Inner Control Arm Upper, Replace
- Bushing Inner Tie Rod, Replacing
- Bushing Outer Control Arm Lower, Replacing
- Bushing Outer Control Arm Upper, Replacing
- Bushing Outer Tie Rod, Replacing
- Bushing Rear Lateral Link, Replacing
- Bushing Rear Sub-Frame, Replacing
- Control Arm Lower, Replacing
- Installing The Upper Control Arm
- Replacing Lateral Links
- Tie Rod, Replacing
- Wheel Knuckle Rear