Removing The Wheel Spindle

Remove: 

• the screw for the control arm outer mounting
• the screw for the outer mounting for the lower control arm
• the screw for the rear mounting for the lateral link
• the screw for the outer mounting for the tie rod
• the screw for the outer mounting drive shaft.

Fig 1: Screw And Wheel Spindle From Upper Control Arm

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Press off the wheel spindle. Use tool 9512923 with 9997054 , 9997031 and 9997031 together with threaded rod 9997039 .

Remove the wheel spindle.