Replacing Lateral Links: Installation

Fig 1: Identifying Lateral Link

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install 

• the lateral link with new screws. Do not tighten yet
• treat the screws with rustproofing agent (P/N 1381065-0).

Press the suspension up to its normal position, see Normal position .

• Tighten the screws for the lateral link. Tighten to 80 Nm 
• Remove the mobile jack.

Fig 2: Removing/Installing Spring Strut From Lower Control Arm

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install 

• the spring strut on the lower control arm. Use a larger jimmy bar to bend the lower control arm down and align the spring strut against the control arm.

• tighten the spring strut to the control arm. Tighten to 80 Nm  .

Fig 3: Bracket From Brake Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Install the mounting strut for the brake hose on the bracket at the front of the sub-frame
• install the wheel according to Installing wheels
• lower the car.