Section 45 (2.8L & 3.2L - Generic Scan Tool, Engine Code(S): AFP, BDF, BJS [A4 Platform] (20 Fuel Supply - 26 Exhaust System, Emission Controls))
WARNING: This page is about a different variant/trim than selected.
- 20 Fuel Supply
- Fuel supply system components, removing and installing
- Fuel supply system components, removing and installing
- Fuel tank with attachments and fuel filter (vehicles with engine code AFP and BDF), removing and installing
- Fuel tank with attachments and fuel filter (vehicles with engine code BJS), removing and installing
- Safety precautions when working on fuel supply system
- Rules of cleanliness
- Fuel tank, draining
- Suction jet pumps (vehicles with engine code BJS), removing and installing
- Fuel Pump (FP) unit, removing and installing
- Crash fuel shut-off
- Fuel Pump (FP), checking
- EVAP canister system
- Function of leak diagnostic
- Parts of EVAP canister system (vehicles with engine code AFP), removing and installing
- Parts of EVAP canister system (vehicles with engine code BDF), removing and installing
- Parts of EVAP canister system (vehicles with engine code BJS), removing and installing
- Parts of Leak Detection Pump -LDP- (vehicles with engine code BJS), removing and installing
- Overview plan of EVAP canister system (vehicles with engine code AFP)
- Overview plan of EVAP canister system (vehicles with engine code BDF)
- Evaporative Emission (EVAP) canister system, checking for proper seal
- Evaporative Emission (EVAP) canister purge regulator valve 1, checking
- Evaporative Emission (EVAP) canister purge solenoid valve 2 (vehicles with engine code BJS), checking
- Leak Detection Pump (LDP), checking
- Leak Detection Pump (LDP) and EVAP canister (vehicles with engine code BJS), removing and installing
- EVAP system, checking using KLI 9210 tester
- Electronic Engine Power Control (EPC)
- Fuel supply system components, removing and installing
- 24 Multiport Fuel Injection (MFI)
- Fuel injection, servicing
- General Notes on Fuel Injection
- Overview of Component Locations (vehicles with engine code AFP)
- Overview of Component Locations (vehicles with engine codes BDF and BJS)
- Parts of the fuel injection (vehicles with engine code AFP), removing and installing
- Parts of fuel injection (vehicles with engine codes BDF and BJS), removing and installing
- Intake manifold upper section (vehicles with engine code AFP), disassembling and assembling
- Intake manifold lower section (vehicles with engine code AFP), disassembling and assembling
- Intake manifold (vehicles with engine code BDF), disassembling and assembling
- Intake manifold (vehicles with engine code BJS), disassembling and assembling
- Fuel rail (vehicles with engine code BDF), disassembling and assembling
- Fuel rail (vehicles with engine code BJS), disassembling and assembling
- Air filter (vehicles with engine code AFP), disassembling and assembling
- Air filter (vehicles with engine code BDF), disassembling and assembling
- Air filter (vehicles with engine code BJS), disassembling and assembling
- Safety precautions
- Rules of cleanliness
- Technical data
- Components, checking
- Oxygen sensor heater for oxygen sensors before catalytic converter, checking
- Oxygen sensor heater for oxygen sensors behind Three Way Catalytic Converter (TWC), checking
- Mass Air Flow (MAF) sensor, checking
- Throttle valve control module, checking
- Engine Coolant Temperature (ECT) sensor, checking
- Intake Air Temperature (IAT) sensor, checking
- Intake manifold change-over valve, checking
- Engine speed (RPM) sensor, checking
- Fuel injectors, checking
- Fuel pressure regulator and residual pressure, checking
- Intake system, checking for leaks (false air)
- Function tests
- Engine Control Module (ECM)
- Additional signals, checking
- Fuel injection, servicing
- 26 Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code AFP)
- Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code BDF)
- Exhaust manifold, front exhaust pipe with double catalytic converter and attachments (vehicles with engine code BJS)
- Muffler with mounts (vehicles with engine codes AFP and BDF)
- Muffler with mounts (vehicles with engine codes BJS)
- Exhaust system (vehicles with engine codes AFP and BDF), aligning
- Three Way Catalytic Converter (TWC), checking
- Exhaust Flap Valve 1 (vehicles with engine code BJS), checking
- Secondary Air Injection (AIR) system
- Secondary Air Injection (AIR) system
- Function
- Parts of Secondary Air Injection (AIR) system (vehicles with engine code AFP), removing and installing
- Parts of Secondary Air Injection (AIR) system (vehicles with engine code BDF), removing and installing
- Parts of Secondary Air Injection (AIR) system (vehicles with engine code BJS), removing and installing
- Secondary Air Injection (AIR) system, checking for proper seal
- Secondary Air Injection (AIR) valve, checking
- Secondary Air Injection (AIR) pump motor, checking
- Combination valve, checking
- Exhaust system components, removing and installing