Parts of Leak Detection Pump -LDP- (vehicles with engine code BJS), removing and installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Leak Detection Pump Components, Assembly Overview (Vehicles With Engine Code BJS)

GW00000548

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Mounting screw

2 - Bracket

for Leak Detection Pump (LDP) -V144-

3 - 15 Nm

4 - Leak Detection Pump (LDP) -V144-*

checking. Refer to Leak Detection Pump (LDP), checking
Removing and installing. Refer to Leak Detection Pump (LDP) and EVAP canister (vehicles with engine code BJS), removing and installing , removing and installing diagnostic pump for fuel system and EVAP canister

5 - Connector

black, 3-pin
for Leak Detection Pump (LDP) -V144-

6 - To Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-

Connected at ventilation line. Refer to Parts of EVAP canister system (vehicles with engine code BJS), removing and installing , item 13
Check for secure fitting

7 - Ventilation line

For fuel tank. Refer to Parts of EVAP canister system (vehicles with engine code BJS), removing and installing , item 19
Check for secure fitting

8 - Filter housing

for Leak Detection Pump (LDP) -V144-

9 - Cover

Clipped onto filter housing

10 - Filter element

for Leak Detection Pump (LDP) -V144-