Three Way Catalytic Converter (TWC), checking

Function test 

• Select the measuring value "Test-ID 01: Catalytic converter" and check whether the specified values are being reached. Refer to Diagnostic mode 6: Check test results of components that are not continuously monitored
• End diagnosis and switch ignition off.

If the specified values are exceeded:

Vehicles with engine codes AFP and BDF 

• Replace the front exhaust pipe with catalytic converter:

• Vehicles with engine code AFP. Refer to Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code AFP)  , item 10
• Vehicles with engine code BDF. Refer to Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments (vehicles with engine code BDF)  , item 14

Vehicles with engine code BJS 

• Replace double catalytic converter. Refer to Exhaust manifold, front exhaust pipe with double catalytic converter and attachments (vehicles with engine code BJS)  , item 11

Continuation for all vehicles 

• Erase DTC memory of Engine Control Module (ECM). Refer to Diagnostic mode 4: Reset/erase diagnostic data
• Generate readiness code. Refer to Readiness code, generating