LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (2.8L & 3.2L - Generic Scan Tool, Engine Code(S): AFP, BDF, BJS [A4 Platform] (20 Fuel Supply - 26 Exhaust System, Emission Controls)) >> 26 Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Muffler with mounts (vehicles with engine codes BJS) >> Installation position of double clamps in direction of travel

Installation position of double clamps in direction of travel

WARNING: This page is about a different variant/trim than selected.
Fig 1: Installed Location Of Double Clamp, In Driving Direction
GW00000570Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Screw tips must not project beyond the lower edge of the double clamp.

2 - Angle 10 ° to 15 °

scientia non olet · About LEMON Manuals