Section 85 (Blind Spot Monitor System - Diagnostic Codes & Symptom Tests (Hybrid))
WARNING: This page is about a different variant/trim than selected.
- BLIND SPOT MONITOR SYSTEM (for HV Model)
- DTC C1A45: Vehicle Speed Sensor [04/2018 -]
- DTC C1A46: Yaw Rate Sensor [04/2018 -]
- DTC C1A47: Steering Angle Sensor [04/2018 -]
- DTC C1AB0: Short to +B in Outer Mirror Indicator (Master) [04/2018 -]
- DTC C1AB1: Short to +B in Outer Mirror Indicator (Slave) [04/2018 -]
- DTC C1AB2: Short to GND in Outer Mirror Indicator (Master) [04/2018 -]
- DTC C1AB3: Short to GND in Outer Mirror Indicator (Slave) [04/2018 -]
- DTC C1AB4: Open in Outer Mirror Indicator (Master) [04/2018 -]
- DTC C1AB5: Open in Outer Mirror Indicator (Slave) [04/2018 -]
- DTC C1AB6: Blind Spot Monitor Master Module [04/2018 -]
- DTC C1AB7: Blind Spot Monitor Slave Module [04/2018 -]
- DTC C1AB8: Destination Information Undefined [04/2018 -]
- DTC C1ABB: Blind Spot Monitor Master Module Beam Axis Inspection Incomplete [04/2018 -]
- DTC C1ABC: Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete [04/2018 -]
- DTC C1ABE: Short to GND or Open in Buzzer [04/2018 -]
- DTC C1AC1: Master Module Horizontal Axis Misalignment [04/2018 -]
- DTC C1AC2: Slave Module Horizontal Axis Misalignment [04/2018 -]
- DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0125: Lost Communication with Yaw Rate Sensor Module; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0142: Lost Communication with Body Control Module "B" [04/2018 -]
- DTC U0232: Lost Communication with Blind Spot Monitor Slave Module [04/2018 -]
- DTC U0233: Lost Communication with Blind Spot Monitor Master Module [04/2018 -]
- DTC U1331: Software Incompatibility with Body Control Module "B" [04/2018 -]
- Circuit Tests
- Symptom Tests