DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0125: Lost Communication with Yaw Rate Sensor Module; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0142: Lost Communication with Body Control Module "B" [04/2018 -]: Description

WARNING: This page is about a different variant/trim than selected.

These DTCs are stored if there is a malfunction in the CAN communication system connected to the blind spot monitor sensor.

HINT:

If CAN communication system DTCs are stored, they may also be stored for other systems.

BLIND SPOT MONITOR MASTER

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U0100	Lost Communication with ECM / PCM "A"	Lost communication with ECM	CAN communication system
U0125	Lost Communication with Yaw Rate Sensor Module	Lost communication with airbag sensor assembly	CAN communication system
U0126	Lost Communication with Steering Angle Sensor Module	Lost communication with steering sensor	CAN communication system
U0129	Lost Communication with Brake System Control Module	Lost communication with brake system	CAN communication system
U0142	Lost Communication with Body Control Module "B"	Lost communication with main body ECU	CAN communication system

BLIND SPOT MONITOR SLAVE

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U0100	Lost Communication with ECM / PCM "A"	Lost communication with ECM	CAN communication system
U0125	Lost Communication with Yaw Rate Sensor Module	Lost communication with airbag sensor assembly	CAN communication system
U0126	Lost Communication with Steering Angle Sensor Module	Lost communication with steering sensor	CAN communication system
U0129	Lost Communication with Brake System Control Module	Lost communication with brake system	CAN communication system
U0142	Lost Communication with Body Control Module "B"	Lost communication with main body ECU	CAN communication system