DTC C1ABE: Short to GND or Open in Buzzer [04/2018 -]: Description

WARNING: This page is about a different variant/trim than selected.

DTC C1ABE is stored when the blind spot monitor sensor LH detects a short to ground or open in the RCTA buzzer (blind spot monitor buzzer) circuit.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C1ABE	Short to GND or Open in Buzzer	Both of the following conditions are met: The blind spot monitor system is on The blind spot monitor sensor is not sounding the buzzer but the buzzer receives voltage below a specified level for a specified period of time.	RCTA buzzer (blind spot monitor buzzer) Wire harness or connector