DTC C1AB5: Open in Outer Mirror Indicator (Slave) [04/2018 -]: Description

WARNING: This page is about a different variant/trim than selected.

This DTC is stored when the blind spot monitor sensor LH detects an open in the outer rear view mirror indicator LH.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C1AB5	Open in Outer Mirror Indicator (Slave)	Both of the following conditions are met: The blind spot monitor system is on The current flowing to the indicator is below a specified value when indicator operation voltage is being sent to the indicator	Outer mirror LH Outer rear view mirror assembly LH Wire harness or connector Blind spot monitor sensor LH Outer mirror control ECU assembly LH*

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AB5

Open in Outer Mirror Indicator (Slave)

Both of the following conditions are met:

The current flowing to the indicator is below a specified value when indicator operation voltage is being sent to the indicator