DTC C1A47: Steering Angle Sensor [04/2018 -]: Description
WARNING: This page is about a different variant/trim than selected.
The blind spot monitor sensor receives steering angle signals from the steering sensor via CAN communication.
BLIND SPOT MONITOR MASTER
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A47 | Steering Angle Sensor | A fail flag is transmitted from the steering angle sensor |
|
BLIND SPOT MONITOR SLAVE
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A47 | Steering Angle Sensor | A fail flag is transmitted from the steering angle sensor |
|