Section 23 (27 Starter, Power Supply, Cruise Control E-Hybrid -- 9YA - Cayenne (9YA))

• WM, 270319 Removing And Installing 48-Volt Voltage Converter
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing 48-Volt Voltage Converter
  • Installing 48-Volt Voltage Converter
    • Installing Voltage Converter
  • Concluding Work
• WM, 270355 Replacing 48-Volt Voltage Converter
  • Technical Values
  • Installation Position
    • Notes
    • Replacing 48-Volt Voltage Converter
• WM, 270619 Removing And Installing Battery/Vehicle Electrical System
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Vehicle Electrical System Battery
    • Removing Vehicle Electrical System Battery (Lithium-Ion Battery)
  • Installing Vehicle Electrical System Battery
    • Installing Vehicle Electrical System Battery (Lithium-Ion Battery)
  • Subsequent Work
• WM, 270655 Replacing The Battery
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
    • Preparatory Work
  • Replacing The Battery
• WM, 270689 Charging Vehicle Electrical System Battery
  • Tools
  • Technical Values
  • Installation Position
  • Checking Charge State With Battery Tester
    • Checking Charge State Of A Lithium-Ion Battery Using A Battery Tester
    • Charging A Lithium-Ion Battery
    • Connecting The Vehicle Electrical System Battery For Trickle Charging
• WM, 2706IN - External Power Connection, Jump-Lead Starting
  • Installation Position
  • Information
    • External Power Connection, Jump-Lead Starting
• WM, 2706IN - General Information On The 12-Volt Lithium-Ion Battery
  • Tools
  • Technical Values
  • Installation Position
  • Information
    • Notes
    • Battery Handling Instructions
    • Warning Notes And Safety Regulations
    • Notes On Removing And Installing The Battery
    • Visual Inspection
    • Charging Lithium-Ion Battery
• WM, 270719 Removing And Installing 48-Volt Auxiliary Battery
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing 48-Volt Auxiliary Battery
    • Removing 48-Volt Additional Battery
  • Installing 48-Volt Auxiliary Battery
    • Installing 48-Volt Additional Battery
  • Subsequent Work
• WM, 270803 Performing Measurements On The High-Voltage Battery
  • Tools
  • Technical Values
  • Installation Position
  • Performing Measurements On The High-Voltage Battery
    • Safety Tests On The Removed High-Voltage Battery Before And After Assembly Work
    • Verifying Absence Of Electric Charge (High-Voltage Battery Removed And Closed)
    • Safety Test Following Assembly Work On The Upper And Lower Battery Level
    • Cooling System Leak Test
    • Battery Housing Leak Test
    • Teach New Cell Module
• WM, 270819 Removing And Installing E-Box
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing E-Box
  • Installing E-Box
  • Subsequent Work
• WM, 270819 Removing And Installing High-Voltage Battery
  • Tools
  • Technical Values
  • General Warning Notices
  • Installation Position
  • Preliminary Work
  • Removing High-Voltage Battery
    • Remove High-Voltage Battery
  • Installing High-Voltage Battery
  • Concluding Work
    • Subsequent Work
• WM, 270837 Disassembling And Assembling High-Voltage Battery
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Disassembling High-Voltage Battery
    • Disassembling Upper Battery Level
    • Disassembling Lower Battery Level
  • Assembling High-Voltage Battery
    • Assembling Lower Battery Level
    • Assembling Upper Battery Level
  • Subsequent Work
• WM, 270855 Replacing High-Voltage Battery
  • Tools
  • General Warning Note
  • Installation Position
  • Preliminary Work
  • Replacing High-Voltage Battery
  • Programming High-Voltage Battery
  • Subsequent Work
• WM, 270889 Charging And Discharging Cell Modules
  • Tools
  • Charging And Discharging Cell Module
• WM, 271219 Removing And Reinstalling Battery Cover
  • Installation Position
  • Removing Battery Cover
  • Installing Battery Cover
• WM, 278119 Removing And Installing Route Detection Control Unit
  • Installation Position
  • Preliminary Work
  • Removing Route Detection Control Unit
  • Installing Route Detection Control Unit
  • Subsequent Work
• WM, 278155 Replacing Route Detection Control Unit
  • Technical Values
  • Installation Position
    • Notes
    • Replacing Route Detection Control Unit
• WM, 278515 Adjusting Control Unit For Distance Measuring Sensor
  • Tools
  • Technical Values
  • Information
    • The Distance Measuring Sensor Must Be Re-Adjusted After Performing The Following Tasks
  • Installation Position
  • Preliminary Work
    • Measuring System Setup
  • Adjusting Control Unit For Distance Measuring Sensor
  • Subsequent Work
• WM, 278519 Removing And Installing Control Unit For Distance Measuring Sensor
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Control Unit For Distance Measuring Sensor
  • Installing Control Unit For Distance Measuring Sensor
  • Subsequent Work
• WM, 278555 Replacing Distance Measuring Sensor Control Unit
  • Technical Values
  • Installation Position
  • Replacing Distance Measuring Sensor Control Unit
  • Subsequent Work
• WM, 279119 Removing And Installing Power Electronics For High-Voltage System
  • Tools
  • Technical Values
  • Installation Position
  • General Warning Notices
  • Preliminary Work
  • Removing Power Electronics For High-Voltage System
  • Installing Power Electronics For High-Voltage System
  • Subsequent Work
• WM, 279155 Replacing Power Electronics For High-Voltage System
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Replacing Power Electronics For High-Voltage System
    • Replace Power Electronics For High-Voltage System
• WM, 27921901 Removing And Installing Rotor Position Sensor
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Rotor Position Sensor
    • Notes
    • Installing Rotor Position Sensor
  • Subsequent Work
• WM, 27921902 Removing And Installing Temperature Sensor
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Temperature Sensor
  • Installing Temperature Sensor
  • Subsequent Work
• WM, 279219 Removing And Installing Elect Machine
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Remove Elect. Machine
    • Removing Electric Motor
  • Install Elect. Machine
    • Installing Electric Motor
  • Subsequent Work
• WM, 279319 Removing And Installing High-Voltage Line Between High-Voltage Charger And High-Voltage Battery
  • Tools
  • Technical Values
  • Installation Position
  • General Warning Notes
    • General Warning Notices
  • Preliminary Work
  • Removing High-Voltage Line Between High-Voltage Charger And High-Voltage Battery
  • Installing High-Voltage Line Between High-Voltage Charger And High-Voltage Battery
  • Subsequent Work
• WM, 279319 Removing And Installing High-Voltage Line From Power Electronics To High-Voltage Battery
  • Tools
  • Technical Values
  • General Warning Notes
    • General Warning Notices
  • Installation Position
  • Preliminary Work
  • Removing High-Voltage Line From Power Electronics To High-Voltage Battery
  • Installing High-Voltage Line From Power Electronics To High-Voltage Battery
  • Subsequent Work
• WM, 279319 Removing And Installing High-Voltage Line From Power Electronics To Electric Motor (R4 And V6)
  • Tools
  • Technical Values
  • General Warning Notices
  • Installation Position
  • Preliminary Work
  • Remove High-Voltage Line From Power Electronics To Electric Motor (R4 And V6)
    • Removing High-Voltage Line From Power Electronics To Electric Motor (R4 And V6)
  • Install High-Voltage Line From Power Electronics To Electric Motor (R4 And V6)
    • Installing High-Voltage Line From Power Electronics To Electric Motor (R4 And V6)
  • Subsequent Work
• WM, 279419 Removing And Installing High-Voltage Battery Control Unit
  • Tools
  • Technical Values
  • General Warning Notices
  • Installation Position
  • Preliminary Work
  • Removing High-Voltage Battery Control Unit
  • Installing High-Voltage Battery Control Unit
  • Subsequent Work
• WM, 279455 Replacing High-Voltage Battery Control Unit
  • Tools
  • Technical Values
  • Installation Position
    • Notes
    • Replacing High-Voltage Battery Control Unit
• WM, 279555 Replacing Pilot Line Connector
  • Tools
  • Component Information
    • Installation Position
  • Preliminary Work
  • Removing Pilot Line Connector
  • Installing Pilot Line Connector
  • Subsequent Work
• WM, 279619 Removing And Installing Control Unit Charging Socket
  • Installation Position
  • Preliminary Work
  • Removing Control Unit Charging Socket
  • Installing Control Unit Charging Socket
  • Subsequent Work
• WM, 279619 Removing And Installing Charging Socket
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Charging Socket
  • Installing Charging Socket
  • Subsequent Work
• WM, 279719 Removing And Installing High-Voltage Charger
  • Tools
  • Technical Values
  • General Warning Notices
    • Installation Position
  • Preliminary Work
  • Removing High-Voltage Charger
  • Installing High-Voltage Charger
  • Subsequent Work
• WM, 279755 Replacing High-Voltage Charger
  • Tools
  • Technical Values
  • Installation Position
    • Notes
    • Replacing High-Voltage Charger