LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (27 Starter, Power Supply, Cruise Control E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 27921902 Removing And Installing Temperature Sensor >> Installing Temperature Sensor

Installing Temperature Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten new  fastening screws to > Tightening torque 6 Nm (4.5 ftlb.)  .

    Tighten fastening screws on heat shield to > Tightening torque 8 Nm (6 ftlb.)  .

scientia non olet · About LEMON Manuals