LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (27 Starter, Power Supply, Cruise Control E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 278519 Removing And Installing Control Unit For Distance Measuring Sensor >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove front apron.

    > 631519 REMOVING AND INSTALLING FRONT APRON

  2. Remove headlight.

    > 941519 REMOVING AND INSTALLING HEADLIGHTS

  3. Mark installation position of headlight mounting on cross member.
  4. Remove headlight mounting -1-  .
    G15242545Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Headlight mounting

    1. 4.1  Unscrew fastening screws -2 and 3-  .
    2. 4.2  Remove headlight mounting -1-  .
  5. Remove (upper) cooling-air flaps.

    > 193519 REMOVING AND INSTALLING COOLING-AIR FLAPS (TOP) - on "Removing"

  6. Loosen cross member -1-  .
    G15242546Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cross member

    1. 6.1  Unclip cross member -1-  (-Arrows-  ).
    2. 6.2  Set cross member -1-  with electric lines connected down on the lock carrier.
scientia non olet · About LEMON Manuals