LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (27 Starter, Power Supply, Cruise Control E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 27921901 Removing And Installing Rotor Position Sensor >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
WARNING: Incorrect handling of high-voltage components 
  • Electric shock 
  • Short circuit 
  • Fire 
  • Explosion 
    1. → Only appropriately trained and authorised persons are permitted to work on high-voltage vehicles and components.
    2. → Required qualification: High voltage technician or high voltage expert.
    3. → Observe national requirements and legislation for this work.
    4. → Always use insulated tools, e.g. > VAS 6883 - Insulated Tool Set  when working on these components.
    5. → Observe general warning notes for working on the high-voltage system.
    6. > WM, 2X00IN GENERAL WARNING NOTES FOR WORKING ON THE HIGH-VOLTAGE SYSTEM
  1. Only for V8 S Hybrid: 

    Install both primary catalytic converters.

    > 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER (V8 BITURBO)

  2. Only for R4 Hybrid: 

    Install primary catalytic converter.

    > 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER (R4)

  3. Only for V6 Hybrid: 

    Install primary catalytic converter.

    > 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER (V6 MONOTURBO)

scientia non olet · About LEMON Manuals