Installing 48-Volt Additional Battery

WARNING: This page is about a different variant/trim than selected.

Installation is performed in reverse order. Pay particular attention to the following:
Guide 48-volt additional battery -1- correctly into the bracket at the bottom -2- .

Tighten fastening nuts on bracket to > Tightening torque 10 Nm (7.5 ftlb.) .

Tighten fastening nuts on battery terminals to > Tightening torque 8 Nm (6 ftlb.) .

G15242212

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

48-volt additional battery