Section 22 (10 - Engine - Crankcase, Suspension (4.8L Turbo) -- 92A - Cayenne (92A))

• Ti, 1001 Complaint - Engine Knock During Acceleration: Checking Engine For Carbon Deposits (17/18)
  • Tools
• WM, 100119 Removing And Installing Engine
  • Tools
  • Preliminary Work
    • Preliminary Work For Removing And Installing Engine
    • Tools And Materials
    • Removing Engine
    • Installing Engine
  • Subsequent Work
    • Subsequent Work For Removing And Installing Engine
• WM, 100127 Removing Engine From Transmission And Mounting Engine On Transmission (V8)
  • Tools
  • Preliminary Work
    • Preliminary Work For Removing Engine From Transmission And Mounting Engine On Transmission
    • Removing Engine From Transmission
    • Mounting Engine On Transmission
  • Subsequent Work
    • Subsequent Work For Removing Engine From Transmission And Mounting Engine On Transmission
• WM, 100137 Disassembling And Assembling Engine
  • Disassembling And Assembling Engine
• WM, 1001IN Supporting The Engine On The Body
  • Tools
  • Preliminary Work
    • Preliminary Work For Supporting Engine On The Body
  • Tools And Materials
    • Tools
    • Supporting The Engine On The Body
  • Subsequent Work
    • Subsequent Work For Supporting The Engine On The Body
• WM, 1001IN Securing Engine On Assembly Support (Mounting Bracket)
  • Tools
  • Securing Engine On Assembly Support
• WM, 1001IN Engine Number Marking
  • Tools
  • Information
    • Engine Number Marking - Cayenne Turbo/Cayenne Turbo S
    • Engine Number Marking
• Ti, 1003 Replacement/Reconditioned Engine Needs To Be Replaced: Only Short Engine Or Short Block Engine Available (27/13)
• Ti, 1004 Spare Parts Requirements For Reconditioned Engine: Checking Length Of Dowel Sleeves (34/15)
  • Parts
• WM, 101001 Assessment Of Cylinder Liners
  • Tools
  • Assessment Of Cylinder Liners
    • Notes
    • Signs Of Damage To Cylinder Liners (Stage 1)
      • Notes
      • Normal Condition Of Used Cylinder
      • Normal Condition Of Used Piston
    • Signs Of Damage To Cylinder Liners (Stage 2)
      • Normal Condition Of Liner/Support For Piston Lateral Forces
      • Striation/One Or More Individual Striations (No Deep Indentations)
      • Striation Band - Individual Striations Form A Complete Dark Band (No Deep Indentations)
    • Signs Of Damage To Cylinder Liners (Stage 3)
      • Liner Damage In The Entire Ring Groove Area
      • Oil Filter And Oil Pan Following Liner Damage
      • Damaged Cylinder Liner! => Engine Damage!
• WM, 101031 Converting Crankcase (Dowel Sleeves)
  • Converting Dowel Sleeves
• WM, 101802 Testing Pressure Loss On The Engine
  • Tools
  • Preliminary Work
  • Information
    • Test Evaluation
  • Testing Pressure Loss On The Engine
    • Checking Pressure Loss On The Engine
  • Subsequent Work
• WM, 103019 Removing And Installing Engine Carrier
  • Technical Values
    • Overview
    • Engine Carrier
  • Preliminary Work
    • Preliminary Work
  • Removing Engine Carrier
  • Installing Engine Carrier
  • Subsequent Work
• WM, 103519 Removing And Installing Engine Mounting
  • Technical Values
  • Preliminary Work
  • Preliminary Work For Right Engine Mounting
  • Preliminary Work For Left Engine Mounting
  • Removing Engine Mounting
  • Installing Engine Mounting
  • Subsequent Work
    • Subsequent Work For Right Engine Mounting
    • Subsequent Work For Left Engine Mounting
• WM, 103719 Removing And Installing Torque Support
  • Technical Values
  • Preliminary Work
  • Removing Torque Support
  • Installing Torque Support
  • Subsequent Work
• WM, 105519 Removing And Installing Oil Separator
  • Preliminary Work
  • Information
    • Component Information
  • Removing Oil Separator
  • Installing Oil Separator
  • Subsequent Work
• WM, 108019 Removing And Installing Engine Guard
  • Technical Values
  • Removing Engine Guard
  • Installing Engine Guard