Section 7 (Engine Air Intake - 164 Chassis)
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2012 Mercedes-Benz GL550, 2012 Mercedes-Benz GL450, 2011 Mercedes-Benz ML63, 2011 Mercedes-Benz ML550, and 2011 Mercedes-Benz ML350. However, it is still accessible from the selected car via links, so may be relevant.
- Basic Knowledge
- Turbocharging, function - GF09.00-P-2000P
- Component description for the vent line heater element - GF09.00-P-4010P
- Component description for the variable intake manifold switchover valve - GF09.20-P-6001AMG
- Component description for the variable intake manifold switchover valve - GF09.20-P-6001BK
- Component description for the variable intake manifold switchover valve - GF09.20-P-6001V
- Component description for the variable intake manifold - GF09.20-P-6002AMG
- Component description for the intake manifold - GF09.20-P-6010BK
- Intake manifold component description - GF09.20-P-6010V
- Component description for the intake port shutoff motor - GF09.20-P-6110P
- Boost pressure control, function - GF09.40-P-3000P
- Component description for the turbocharger - GF09.40-P-4010P
- Boost pressure positioner, component description - GF09.40-P-4020P
- Component description for the charge air cooler - GF09.41-P-5000GZ
- Testing & Repair
- Remove/install air cleaner housing - AR09.10-P-1150GZ (ML500)
- Remove/install air filter housing - AR09.10-P-1150GZA (ML350, ML550, GL450, GL550)
- Remove/install air filter housing - AR09.10-P-1150GZS (ML63 AMG)
- Remove/install the air duct housing - AR09.20-P-0080GZA (ML350, ML550, GL450, GL550)
- Intake manifold connection diagram - AR09.20-P-1310-01GZ (ML500)
- Remove/install intake manifold - AR09.20-P-1310GZ (ML500)
- Detach/attach connecting flange on intake manifold - AR09.20-P-1311AMG (ML63 AMG)
- Remove, install resonance intake manifold - AR09.20-P-1961GZA (ML350, ML550, GL450, GL550)
- Remove, install resonance intake manifold - AR09.20-P-1961GZS (ML63 AMG)
- Remove/install tumble flap and resonance flap switchover valve at intake manifold - AR09.20-P-1990GZD (ML350, ML550, GL450, GL550)
- Remove, install tumble flap position sensor to intake manifold - AR09.20-P-1995GZA (ML350, ML550, GL450, GL550)
- Open and close coupling - AR09.41-P-1311-01AL
- Maintenance
- Torque Specifications