Section 958 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle (2 Of 3))
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Repair Instructions - Off Vehicle (2 Of 3)
- Crankshaft and Bearing Cleaning and Inspection
- Crankshaft Balancer Cleaning and Inspection
- Engine Flywheel Cleaning and Inspection
- Piston and Connecting Rod Disassemble
- Piston, Connecting Rod, and Bearing Cleaning and Inspection
- Piston and Connecting Rod Assemble
- Cylinder Head Disassemble
- Cylinder Head Cleaning and Inspection
- Valve Spring Inspection and Measurement
- Valve and Seat Grinding
- Valve Cleaning Procedure
- Valve Visual Inspection Procedure
- Valve Measurement and Reconditioning Overview
- Valve Seat Width Measurement Procedure
- Valve Seat Roundness Measurement Procedure
- Valve Margin Measurement Procedure
- Valve-to-Seat Concentricity Measurement Procedure
- Valve and Seat Reconditioning Procedure
- Valve Stem Height Measurement Procedure
- Cylinder Head Assemble
- Camshaft Cleaning and Inspection
- Valve Lifter Cleaning and Inspection
- Valve Rocker Arm Cleaning and Inspection
- Camshaft Timing Drive Components Cleaning and Inspection
- Oil Pump Disassemble
- Oil Pump Cleaning and Inspection
- Oil Filter Adapter Disassemble
- Oil Filter Adapter Cleaning and Inspection
- Oil Filter Adapter Assemble
- Oil Pan Disassemble
- Oil Pan Cleaning and Inspection
- Oil Pump Suction Pipe and Screen Cleaning and Inspection
- Oil Pan Assemble
- Engine Front Cover Disassemble
- Engine Front Cover Cleaning and Inspection
- Engine Front Cover Assemble
- Camshaft Cover Disassemble
- Camshaft Cover Cleaning and Inspection
- Camshaft Cover Assemble
- Intake Manifold Disassemble
- Intake Manifold Cleaning and Inspection
- Intake Manifold Assemble
- Exhaust Manifold Cleaning and Inspection - Left Side
- Exhaust Manifold Cleaning and Inspection - Right Side
- Water Pump Cleaning and Inspection
- Thread Repair
- Service Prior to Assembly
- Engine Block Assemble
- Crankshaft and Bearing Installation
- Piston, Connecting Rod, and Bearing Installation
- Crankshaft Rear Oil Seal and Housing Installation
- Engine Oil Pump Installation
- Engine Oil Pan Installation
- Cylinder Head Installation - Right Side
- Valve Lifter Installation - Right Side
- Valve Rocker Arm Installation - Right Side
- Camshaft Installation - Right Side
- Cylinder Head Installation - Left Side
- Valve Lifter Installation - Left Side