LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle (2 Of 3)) >> Repair Instructions - Off Vehicle (2 Of 3) >> Oil Pan Assemble

Oil Pan Assemble

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Pan Drain Plug & Seal
    GM2202054Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the oil pan drain plug (1) and NEW O-ring seal (2) and tighten to 25 N.m (18 lb ft).
    2. Fig 2: Oil Suction Pipe O-Ring
    GM2202053Courtesy of GENERAL MOTORS CORP.
  2. Install the NEW oil suction pipe O-ring (1).
    3. Fig 3: Oil Suction Pipe & Bolts
    GM2202052Courtesy of GENERAL MOTORS CORP.
  3. Install the oil suction pipe (2).
  4. Install the oil suction pipe bolts (1) and tighten to 10 N.m (89 lb in).
    5. Fig 4: Oil Pan Scraper & Bolts
    GM2202051Courtesy of GENERAL MOTORS CORP.
  5. Install the oil pan scraper (2).
  6. Install the oil pan scraper bolts (1) and tighten to 10 N.m (89 lb in).
scientia non olet · About LEMON Manuals