LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle (2 Of 3)) >> Repair Instructions - Off Vehicle (2 Of 3) >> Engine Oil Pump Installation

Engine Oil Pump Installation

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Oil Pump & Bolts
    GM1866869Courtesy of GENERAL MOTORS CORP.
  1. Align the oil pump drive gear with the crankshaft flats and install the oil pump to the engine block.
  2. Align the pump body with the mounting holes in the cylinder block.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the oil pump bolts and tighten to 25 N.m (18 lb ft).
scientia non olet · About LEMON Manuals