Section 325 (Final Drive, Differential (Rear Final Drive 0D2, 0D3, 0DB, 0B0, 0BX, 0DG, 0G2, 09R))
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- 39 Final Drive, Differential
- Safety Precautions
- Driveshaft
- Final Drive
- Overview - Final Drive
- Final Drive, Removing And Installing
- Final Drive, Disassembling And Assembling
- Notes
- OVERVIEW - FINAL DRIVE, DISASSEMBLING AND ASSEMBLING, 0B0 "quattro ultra", 09R "quattro ultra"
- OVERVIEW - HOUSING, 0B0 "quattro ultra"
- OVERVIEW - REAR ALL-WHEEL DRIVE CLUTCH, 0B0 "quattro ultra"
- OVERVIEW - FINAL DRIVE, DISASSEMBLING AND ASSEMBLING, 0D3 AND 0BX "quattro sport"
- Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra"
- All-Wheel Drive Clutch Actuator 2 -V623-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra"
- REPLACE SHIFT FORK, 0B0 "quattro ultra"
- HYDRAULIC CONTROL UNIT, REMOVING AND INSTALLING, 0D3 "quattro sport" AND 0BX "quattro sport"
- HYDRAULIC CONTROL UNIT, 0D3 "quattro sport" AND 0BX "quattro sport"
- Overview - Hydraulic Control Unit 0D3 And 0BX
- All-Wheel Drive Pump -V415-, REMOVING AND INSTALLING, 0D3 AND 0BX
- Oil Pressure/Temperature Sensor -G437- OR Oil Pressure/Temperature Sensor 2 -G640-, REMOVING AND INSTALLING, 0D3 AND 0BX
- All-Wheel Drive Clutch Valve -N445- OR All-Wheel Drive Clutch Valve 2 -N446-, REMOVING AND INSTALLING, 0BE AND 0BX
- TORQUE DISPLACEMENT, CHECKING, 0D3 "quattro sport" AND 0BX "quattro sport"
- Gear Oil
- Component Location Overview - Drain And Check Plugs
- Component Location Overview - Drain And Check Plugs, 0DB, 0D2 And 0G1 / 0G2
- Component Location Overview - Drain And Check Plugs 0DG
- COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 0B0 "quattro ultra"
- COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 09R "quattro ultra"
- COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 0D3 "quattro sport" AND 0BX "quattro sport"
- Gear Oil, Checking Level
- Gear Oil, Draining And Filling
- Component Location Overview - Drain And Check Plugs
- ATF
- Seals
- Component Location Overview - Seals
- Component Location Overview - Seals, 0DB, 0D2 And 0G1 / 0G2
- Component Location Overview - Seals 0DG
- COMPONENT LOCATION OVERVIEW - SEALS, 0B0 "quattro ultra"
- COMPONENT LOCATION OVERVIEW - SEALS, 09R "quattro ultra"
- COMPONENT LOCATION OVERVIEW - SEALS, 0D3 "quattro sport" AND 0BX "quattro sport"
- COMPONENT LOCATION OVERVIEW - SEALS ON ALL-WHEEL DRIVE CLUTCH "quattro ultra"
- Left Seal, Replacing
- Right Seal, Replacing
- Input Shaft Seal, Replacing
- Flange Shaft Protective Ring, Replacing
- Flange/Driveshaft Protective Ring, Replacing
- Component Location Overview - Seals
- Assembly Mounts
- All-Wheel Drive Clutch
- Overview - All-Wheel Drive Clutch
- Component Location Overview - Drain And Check Plugs
- All-Wheel Drive Clutch, Removing And Installing
- Additional Work When Replacing All-Wheel Drive Clutch
- Oil Level, Checking
- All-Wheel Drive Clutch Oil, Draining And Filling
- Control Module, Removing And Installing
- ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra"
- All-Wheel Drive Clutch Torque, Checking
- All-Wheel Drive Clutch Output Shaft Seal, Replacing
- All-Wheel Drive Clutch Input Shaft Seal, Replacing
- Transmission Control
- Component Location Overview - Transmission Control
- All-Wheel Drive Control Module -J492-, REMOVING AND INSTALLING, VEHICLES WITH "quattro ultra"
- Differential Lock Control Module -J187-, REMOVING AND INSTALLING, VEHICLES WITH "quattro sport"
- ADDITIONAL WORK AFTER REPLACING Differential Lock Control Module -J187-