Gear Oil Level, Checking, 0DG
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Drip Tray
-- Remove the oil filler plug -arrow A- to check the gear oil.
The oil level is correct when the rear final drive is filled up to the lower edge of the oil fill hole.
- Transmission fluid specification. Refer to CAPACITIES .
-- Install the plug -arrow A- and tighten it. Tightening specification Refer to COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS 0DG .