Additional Work When Replacing All-Wheel Drive Clutch
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- These procedures are only done when the all-wheel drive clutch is being replaced.
Special tools and workshop equipment required
-- Connect the Vehicle Diagnostic Tester and switch on the ignition.
-- On the Vehicle Diagnostic Tester, select the function 22 - Replace control module under Guided Functions in the directory 22 - AWD electronics .
-- Start the selected program and follow the instructions in the display of the Vehicle Diagnostic Tester.
- Follow all the instructions given by the Vehicle Diagnostic Tester exactly.