Flange Shaft Protective Ring, Replacing, 0DB, 0D2 And 0G1 / 0G2

Special tools and workshop equipment required 

• Press Plate:VW 401 
  Fig 1: Press Plate

  Courtesy of AUDI OF AMERICA, LLC
• Press Plate:VW 402 
  Fig 2: Press Plate VW402

  Courtesy of AUDI OF AMERICA, LLC
• Press Piece - Multiple Use:VW 412 
  Fig 3: Identifying Press Piece - Multiple Use VW412

  Courtesy of AUDI OF AMERICA, LLC
• Press Piece - Deflection Ring:T40089/1 
  Fig 4: Assembly Tool T40089/1 And Assembly Tool T40089/2

  Courtesy of AUDI OF AMERICA, LLC
• Thrust Piece:T10526 
• -3- Separating Tool - 22 to 115mm, for example Splitter:VAS251411 
  Fig 5: Commercially Available Puller Set

  Courtesy of AUDI OF AMERICA, LLC

• Flange shaft removed.

Removing the protective ring A from the flange shaft

Fig 6: Identifying Separating Tool

Courtesy of AUDI OF AMERICA, LLC

B -

Separating Tool, for example Splitter:VAS251411 

Installing the protective ring 1 on the flange shaft

Fig 7: Installing the protective ring -1- on the flange shaft

Courtesy of AUDI OF AMERICA, LLC

• Installation position: the larger outer diameter of the protective ring faces toward the flange.