ATF, DRAINING, 0BX "quattro sport"
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Drip Tray
- Refer to COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 0D3 "quattro sport" AND 0BX "quattro sport"
-- Remove the ATF check plug -1- so that the ATF drains faster out of the drain hole.
-- Remove the ATF drain plug -2- and drain the ATF.
-- Install the new ATF drain plug -2- and tighten. Tightening specification ) OVERVIEW - FINAL DRIVE, DISASSEMBLING AND ASSEMBLING, 0D3 AND 0BX "quattro sport".
-- Fill the ATF in the rear final drive. Refer to ATF, FILLING, 0D3 AND 0BX "quattro sport" .