Component Location Overview - Seals 0DG

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Final Drive Seals (0DG)

Courtesy of AUDI OF AMERICA, LLC

Right Flange Shaft
- Removing and Installing. Refer to RIGHT SEAL, REPLACING .
- Right and left flange shaft are identical
Right Protective Ring
- Replacing. Refer to FLANGE SHAFT PROTECTIVE RING, REPLACING .
Circlip
- Always replace.
Right Seal
- Replacing. Refer to RIGHT SEAL, REPLACING .
Rear Final Drive
- Refer to FINAL DRIVE, REMOVING AND INSTALLING
Left Flange Shaft
- Removing and Installing. Refer to LEFT SEAL, REPLACING .
- Right and left flange shaft are identical
Left Protective Ring
- Replacing. Refer to FLANGE/DRIVESHAFT PROTECTIVE RING, REPLACING .
Circlip
- Always replace.
Left Seal
- Replacing. Refer to LEFT SEAL, REPLACING .
Input Shaft Seal
- Replacing. Refer to INPUT SHAFT SEAL, REPLACING .
O-Ring
- Always replace.
Protective Ring on Flange/Driveshaft
- Replacing. Refer to FLANGE/DRIVESHAFT PROTECTIVE RING, REPLACING .
Flange/Driveshaft
- Removing and Installing. Refer to INPUT SHAFT SEAL, REPLACING .
Circlip