Convertible Top, Doors - Cleaning, Inspection And Adjustment (Convertible)

• Adjustments Convertible System (1999-2004)
  • Mechanical check
    • Mechanical check
  • Replacing and adjusting micro-switches
  • Replacing and adjusting the convertible top unit
  • Replacing and adjusting the limit position stops for the tension bow
  • Replacing and adjusting the striker plate for the cover
  • Replacing, adjusting and emergency opening of the cover
• Checking/ Replacing Insulation Mats (1998-1999)
  • Checking/replacing insulation mat
    • Remove rear seat cushion
    • Remove center cushion armrest, headrests, and backrest cushion
    • Remove rear seat cushion anchors
    • Check rear insulation mat
    • Definition of amount of wetness / moisture
    • Replacing insulation mat
    • Remove power seat control panel
    • Install transport safety cap
    • Remove seat track bolts
    • Preparation for seat removal
    • Remove seat
    • Check rear passenger foot-well and front insulation mats
    • Damp rear passenger foot-well mat
    • Wet rear passenger foot-well mat
    • Damp front foot-well mat
    • Wet front foot-well mat
    • Location of Template
    • Replace wet front foot-well mat (partial)
    • Install Driver's Seat Only
    • Before installing driver's seat
• Cleaning The Convertible Top (1998-2004)
  • Cleaning the convertible top
    • Preparations
    • Cleaning the convertible top
    • Applying the impregnator
• Lock Brace, Inspection And Adjustment (1998)
  • Inspecting and adjusting the lock brace
    • Preparations
    • Inspecting the lock brace
    • Adjusting lock brace
• Noise Reduction - Doors (1998-2004)
  • Noise reduction - doors
    • Noise from door lock when stopping / starting
    • Noise from door panel mounting (applies to all doors)
• Programming And Calibrating The Convertible System (1998-2004)
  • Programming and calibrating the convertible system
    • Notes
    • Preparatory work
    • Calibration routine
• Side Door With Controls (1998-2004)
  • Side door front assembly, adjusting
    • Notes
    • Step 1
      • Adjusting the base of the door mirror
      • Final requirements for the base of the door mirror
    • Step 2
      • Adjusting the front power window lift mechanism cassette
    • Step 3
      • Turning/twisting front side door
      • Final requirements for turning/twisting
    • Step 4
      • Centering lock facing in door lock
    • Step 5
      • Adjusting the pre-tension of the side window
    • Step 6
      • Adjusting clearance between side window and convertible top seals
    • Final check
      • Checking final requirements
• Test Operation Of Convertible System (1998-2004)
  • Test operation of the convertible system