Section 138 (Air Bag & Seat Belts - Removal & Installation (Coupe))

• Air Bag
  • Passenger Airbag Module, Replacing
    • Disassembly
      • Preparations
      • Removing The Glove Compartment
      • Removing The Ignition Cable For The SRS Airbag
      • Removing The Screws For The SRS Airbag
      • Removing The Ventilation And Loudspeaker Grilles
      • Removing The Panel
      • Removing The SRS Airbag From The Panel
    • Reassembly
      • Assemble In Reverse Order
    • Conclusion
      • SRS Airbag Date Decal
      • Final Check
  • SRS Contact Reel, Replacing
    • Removing
    • Installing
  • SRS Module, Replacing
    • Disassembly
      • Preparations
      • Removing The SRS Control Module
    • Reassembly
      • Installing The Connector For The SRS Control Module
      • Installing The SRS Control Module
      • Conclusion
        • Final check
  • Side Impact Sensors, Replacing
    • Removing Panel
    • Removing B-Post Sensor
    • Installation
  • SRS Control Module, Disassembly and Reassembly
    • Disassembly
      • Preparations
      • Removing
        • Removing the SRS control module
        • Removing the connector for the SRS control module
    • Reassembly
      • Installing
        • Installing The Connector For The SRS Control Module
        • Installing The SRS Control Module
      • Completion
        • Final Check
  • SRS Diagnostic Trouble Code (DTC) Table
  • Steering Wheel Air Bag Module, Steering Wheel And Contact Reel, Dismantling and Assembly
    • Dismantling
      • Notes
      • Preparations
        • Notes
        • Ignition In Position I
        • Loosen The Steering Wheel Screws
        • Removal Of Steering Wheel Air Bag Module
        • Positioning Of The Steering Wheel Air Bag Module
        • Connecting Special Tools
        • Loosen The Retaining Screw From The Centre Of The Steering Wheel
        • Connect The Battery Negative Lead
        • Align The Front Wheels
      • Steering Wheel Is Incorrectly Aligned
        • Disconnect The Battery Negative Lead
        • Remove The Special Tools
        • Fasten The Contact Reel
        • Remove The Retaining Screw In The Centre Of The Steering Wheel
        • Removal Of Steering Wheel, Steering Column Cover And Selector
        • Removal Of Contact Reel/SRS
    • Assembly
      • Setting The Contact Reel
        • Setting The Contact Reel To Zero
        • Installation Of Contact Reel/SRS
        • Installation Of Selector, Steering Column Covers And Steering Wheel
        • Installing The Retaining Screw In The Centre Of The Steering Wheel
        • Unlocking The Contact Reel
        • Connect The Special Tools
        • Connect The Battery Negative Lead
        • Alignment Of Front Wheels
      • Install
        • Tightening the retaining screw in the center of the steering wheel
        • Installation of steering wheel air bag module
      • Final Work
        • SRS Air Bag Date Label
        • Final Check
  • Supplemental Restraint System Module (SRS), Reuse
    • Notes
    • What Is Replaced And When?
    • Procedures
  • Tightening Torque, General
    • General Tightening Torque
    • Summary Of Tightening Torques For Specific Components
• Seat Belts
  • Front Seat Belts, Replacing
    • Preparations
    • Disassembly
      • Removing Seat Belt From Slide Rail
      • Removing Seat Belt (Inertia) Reel With Seat Belt Tensioner From B-Post
      • Checking Seat Belt Tensioner Piston Position
      • Removing Seat Belt Buckle
    • Reassembly
      • Assemble In Reverse Order
    • Conclusion
      • Check Seat Belt Function
      • Ignition In Position II. Reconnect Battery Negative Lead
      • Check
  • Seat Belt, Replacing
    • Replace Front Seat Belt
      • Preparations
        • Ignition Off And Disconnect The Battery Negative Lead
      • Disassembly
        • Front Seat Belt
        • B-Post Inner Panel And Connector
        • Seat Belt (Inertia) Reels And Seat Belt Tensioners
        • Removing The Seat Belt Buckle
        • Installing The Seat Belt Buckle
      • Completion
        • Check Seat Belt Function
        • Ignition In Position II. Reconnect The Battery Negative Lead
        • Check
    • Rear Seat Belts
    • Replacing Rear Seat Belt, 4-Door
  • Seat Belts, Rear Seat, Replacing
    • Preparations
      • Preparations
    • Disassembly
      • Removing Seat Belt End Mounting And Seat Belt Buckle
      • Removing Upper Seat Belt Guide Panel Under The Parcel Shelf
      • Removing Seat Belt (Inertia) Reel With Seat Belt Tensioner
      • Checking Seat Belt Tensioner Piston Position
    • Reassembly
      • Assemble In Reverse Order
    • Conclusion
      • Check Seat Belt Function
      • Ignition In Position II. Reconnect Battery Negative Lead
      • Check
  • Seat Belt Buckle End Mounting, Replacing
    • Remove
    • Install
  • Seat Belt Tensioner, Checking