Removing The SRS Airbag From The Panel
WARNING: This page is about a different variant/trim than selected.
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed airbag module. This could deploy the airbag.
CAUTION:
Remove only the illustrated screws and nuts.
WARNING:
The passenger airbag module must never be taken apart, repaired or moved to another vehicle. For handling of a replaced module, see Handling replaced SRS airbags / seat belt tensioners .
Remove 6 M6 nuts, 10 mm from the passenger airbag module.
When installing, torque tighten to 10 Nm .