Component Location Overview - Rear Axle

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Subframe
- Refer to Overview - Subframe .
- Refer to Subframe, Securing .
- Refer to SUBFRAME, LIFTING WITH SCISSOR LIFT TABLE .
- Refer to Rear Axle, Removing and Installing .
Coupling Rod
- Refer to Overview - Stabilizer Bar .
- Refer to Coupling Rod, Removing and Installing .
Stabilizer Bar
- Refer to Overview - Stabilizer Bar .
- Refer to Stabilizer Bar, Removing and Installing .
Wheel Bearing Housing
- Refer to Overview - Wheel Bearing .
- Refer to Wheel Bearing Housing, Removing and Installing .
Shock Absorber
- Refer to Overview - Shock Absorber .
- Refer to Shock Absorber, Removing and Installing .
Spring
- Refer to Overview - Spring .
- Refer to Spring, Removing and Installing .
Drive Axle
- Refer to Overview - Drive Axle .
- Refer to Drive Axle, Removing and Installing .
Front Upper Control Arm
- Refer to Overview - Control Arm .
- Refer to Upper Front Control Arm, Removing and Installing .
Spring Link
- Refer to Overview - Spring Link .
- Refer to Spring Link, Removing and Installing .
Rear Upper Control Arm
- Refer to Overview - Control Arm .
- Refer to Upper Rear Control Arm, Removing and Installing .
Tie Rod
- Refer to Overview - Tie Rod .
- Refer to Tie Rod, Removing and Installing .
Lower Control Arm
- Refer to Overview - Control Arm .
- Refer to Lower Control Arm, Removing and Installing .