Overview - Stabilizer Bar
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
- Stabilizer Bar
- With bearings
- Refer to Stabilizer Bar, Removing and Installing .
- Bearings
- Coupling Rod
- Refer to Coupling Rod, Removing and Installing .
- Subframe
- Refer to Overview - Subframe .
- Refer to Subframe, Securing .
- Refer to SUBFRAME, LIFTING WITH SCISSOR LIFT TABLE .
- Refer to Rear Axle, Removing and Installing .
- Rear Upper Control Arm
- Refer to Overview - Control Arm .
- Refer to Upper Rear Control Arm, Removing and Installing .
- Bolt
- Quantity: 2
- Replace after removing
- M 10 x 75
- 50 Nm + 180°
- Nut
- Quantity: 2
- Replace after removing
- M 10
- Inner Contact
- Nut
- Quantity: 2
- Replace after removing
- M 10
- 55 Nm
- Bolt
- Quantity: 4
- Replace after removing
- M 8 x 30
- 20 Nm +90°