Section 5 (28 Ignition System, PREGLOW System 2.0L -- 95B - MACAN (95B))

• WM, 280419 Removing And Installing Ignition Starter Switch
  • Tools
  • Installation Position
  • Preliminary Work
  • Removing Ignition Starter Switch
  • Installing Ignition Starter Switch
  • Subsequent Work
• WM, 282020 Removing And Installing Ignition Coils (R4)
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Ignition Coils
  • Installing Ignition Coils
  • Subsequent Work
• WM, 2820IN - Applying Lubricant On Ignition Coils
  • Information
    • Notes
    • Lubrication Area For Rubber Sleeve On Ignition Coil
• WM, 283919 Removing And Installing Camshaft Sensor (R4)
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Remove Camshaft Sensor
    • Remove Camshaft Sensor (Outlet Camshaft)
    • Remove Camshaft Sensor (Intake Camshaft)
  • Install Camshaft Sensor
    • Install Camshaft Sensor (Outlet Camshaft)
    • Install Camshaft Sensor (In Take Camshaft)
  • Subsequent Work
• WM, 284419 Removing And Installing Hall-Sender Rotor (R4)
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Hall-Sender Rotor
  • Installing Hall-Sender Rotor
  • Subsequent Work
• WM, 287020 Removing And Installing Spark Plugs (R4)
  • Tools
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Spark Plugs
  • Installing Spark Plugs
  • Subsequent Work
• WM, 287219 Removing And Installing Knock Sensor (R4)
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Knock Sensor
  • Installing Knock Sensor
  • Subsequent Work
• WM, 287319 Removing And Installing Pulse Sender (R4)
  • Technical Values
  • Installation Position
  • Preliminary Work
  • Removing Pulse Sender
  • Installing Pulse Sender
  • Subsequent Work